%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Floppy Disk Port Based Amiga Network by Douglas J. Nakakihara %%
%% dnakakihara@bix.com %%
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
/********************************************************************
NOTICE: This is the originally submitted text for an article that
appeared in the March 21, 1994 issue (#121) of MICROTIMES magazine.
(There are some slight edited differences between the published
version and this one.)
This article is freely-distributable as long as it remains unchanged
and this notice and the copyright remain included.
This article may not be re-published in any magazine, newsletter,
or similar media, including those electronically distributed,
without obtaining prior approval from the author. This provision
does *not* apply to USENET or BBSs.
Specific permission has been granted to Amiga Report.
Copyright(C)1994 Douglas J. Nakakihara.
The author can be reached thru Internet at dnakakihara@bix.com.
MICROTIMES is published by BAM Media, Inc.
3470 Buskirk Ave.
Pleasant Hill, CA 94523
(510)934-3700
MICROTIMES is available free at various distribution points
(usually computer stores) throughout California. The Northern
edition is over 300 pages, while the Southern edition is a little
less than 200 pages. This is a multi-platform magazine, which
includes Amiga coverage. About 200,000 copies are distributed each
month.
SUBSCRIPTIONS (13 issues):
US: 3rd Class $32 (allow 3-4 weeks for delivery), 1st Class $60
(allow 1-2 weeks for delivery).
MEXICO & CANADA: Surface Mail $50 (allow 4 weeks for delivery).
Air Mail $70 (allow 1 week for delivery).
OVERSEAS: Surface Mail $50 (Allow 6-10 weeks for delivery). Air
Mail $165 (Allow 1 week for delivery).
SAMPLE ISSUES: $4 ($6 for overseas) to cover postage.
BACK ISSUES: $6.
Although, efforts have been made to ensure the above information is
correct, there is no guarantee and prices are subject to change
without prior notice.
/********************************************************************
Floppy Disk Port Based Amiga Network
By Douglas J. Nakakihara
Spectronics International U.S.A. is now shipping a terrific
product called AmigaLink that allows Amigas to be networked using the
floppy drive port! Now even slotless models like the A500, A1200, and
CDTV can be part of a network.
Although networking usually involves multiple users, single users
can also benefit. Each step in the evolution of the Amiga has meant some
incompatibility or another. As a result, many Amiga owners continue to
hang on to them, even after purchasing a newer model. By networking
them, peripherals can be shared, allowing maximum use of all hardware.
ParNet
Of course, many Amiga owners already rely on the freely-
distributable ParNet software to network Amigas. Like ParNet, AmigaLink
is also a so-called peer-to-peer network because all of the nodes (i.e.,
networked computers) are equals, and any one of them can access
another's storage devices. A4000-Toaster owners will appreciate the fact
that AmigaLink also doesn't use an expansion slot.
However, as wonderful as ParNet is, it's just a toy compared to
AmigaLink. A downside of using ParNet is that only two Amigas can be
networked, AmigaLink can have up to 20. Furthermore, because ParNet
monopolizes the parallel port, it can be a real pain using other
peripherals that use this port, like a printer, scanner, or audio
digitizer. ParNet also provides no access-security between nodes.
Although, 20 is the recommended maximum number of nodes, that
number can be exceeded, as can the recommended cable length limit of 330
feet. Apparently, the amount of interference at the network's location
determines the actual maximums. But this can only be determined by trial
and error. For example, using shorter cabling between nodes, may allow
you to exceed 20 Amigas.
Installation
Although the manual provides adequate step-by-step instructions,
they are spread over several chapters and the process takes longer than
it should. Because installation is fairly involved, it would have been
much better if the installation steps were consolidated and preceded by
a brief overview of the procedures. In spite of this, I had two nodes up
and running in about one-half hour.
Hardware Hookup
To install AmigaLink, you must first physically connect the
computers. The petite AmigaLink adapter is basically a 23-pin connector
with a BNC T-connector protruding from where a cable would normally
exists. A removable terminating cap is attached to one end of the T-
connector. AmigaLink will work with pass-through connectors and you can
still have up to three floppy drives on each Amiga.
Each Amiga must have its own adapter and 50-ohm RG-58 coaxial
cabling is supplied to connect the them together. By removing the
terminating cap, you can daisy-chain multiple computers together;
however, there must be a terminating cap on the first and last nodes.
The procedure is easy and you don't even have to open a computer case!
The T-connector portion of the adapter is removable and you can
disconnect or reconnect nodes without powering down. Connections will be
re-established once nodes are reattached. However, you should never add
or remove an AmigaLink adapter while the computer is running.
Software Installation
The software is installed in three steps. First you must install
the device driver on each Amiga. This is accomplished by merely clicking
an icon and following the instructions. The manual provides detailed
instructions on what AmigaDOS commands must be available for the
installation script to work properly (e.g., Run, NewCLI, Copy, etc.). If
the software is being installed on a floppy disk, you must delete some
files to make room for the AmigaLink software. A handy list of deletable
files is provided for Workbench 1.3 and 3.0 disks. Between the two, you
can come up with a list for a 2.x Workbench disk. Obviously, you should
use a copy of your original Workbench disk.
The second step is to install the file system software on each
computer. Again, this is a click-and-go procedure. During this process
you will be asked for a "host" name. Each node must have a unique name,
like "Dougs4K", or "CDTV1." I'd recommend that you keep names as short
as possible for reasons you'll see later on. (I was surprised to find
that the AmigaLink device driver is SANA-II compatible (Standard Amiga
Network Architecture). This means that ENVOY or other SANA-II compatible
networking software can be used instead of the AmigaLink file system
software.)
Configuring Nodes
Once the device driver and file system are installed on all
Amigas, the third step is to run the configuration programs on each
node. These programs do not have to be installed on each node and can be
run from the AmigaLink floppy disk. However, I found it more convenient
to copy them to my hard drives for possible future configuration
changes. There are two configuration programs: Import and Export.
Export
Export allows you to identify which devices are available to other
nodes. Remember, AmigaLink is a true multi-user network. As such, you
can keep certain devices private and not allow remote access. This
covers all storage devices including RAM: and removable media, like
floppy drives (a disk must be present).
The Export settings can be saved as a default or just used for the
current session. The settings file is saved in the ENVARC: directory
under Networks. (ENVARC: is a standardized storage area for
configuration information.) You can also save multiple settings.
Import
Running the Import program brings up a list of the other nodes on
the network, called "hosts." By selecting one of the hosts with the
mouse, a list of all of its available (i.e., exported) devices appears.
You can then select which devices should be mounted on this particular
node. (Normally, the Export program should be run on all nodes before
running the Import program.)
To avoid name conflicts, Import automatically appends the name of
the Host to the front of the device and volume names. (Remember, every
Amiga storage device has both a device and volume name, which are
usually different.) For example, the device and volume names "HD1" and
"Work" on host "A3000" become "A3000-HD1" and "A3000-Work",
respectively. So if a node already had a HD1 device called Work, a
similarly named device on a remote node could be accessed without
conflict. The default names can be changed, however.
The Import settings are saved in a file in the WBStartup drawer.
Although this is a logical location, booting up without all nodes active
will yield a slew of annoying error requestors. You can drag the Import
icon out of the WBStartup drawer, but you'll have to move it every time
new settings are saved. I remedied this by adding some lines to my
Startup-Sequence that checks for the Import files in the WBStartup
drawer and then moves them to another drawer. This works because the
Startup-Sequence is executed before WBStartup programs are run. I don't
know why the Import settings aren't saved in the ENVARC: directory just
like the Export settings. This would allow the Import startup icon to be
placed anywhere.
Utilities
Diagnostic utility programs are also supplied. One is a self-
testing program which identifies hardware problems. Two other programs
test the receiving and sending abilities of computers on the network.
The Statistics program monitors and displays network performance
information.
Network Printing
AmigaLink comes with a utility program called Spooler, which
allows multiple nodes to "print" to the same printer. Spooler is run on
the node with the printer, referred to as a "print-server." The program
monitors a user-specified directory for activity. When a file is
completely "printed" to that directory, Spooler sends it to the printer
port, usually PAR:, and then deletes the file.
All other nodes must run the AmigaDOS CMD command, usually found
in the Tools or Utilities drawer. Generally, CMD is used to redirect
printer output to a file in RAM:. However, the output it intercepts can
also be redirected over the network to the monitored Spooler directory.
You should be able to set up multiple print-servers, each running its
own Spooler. Nodes could then print to any of these servers by simply
changing the CMD redirection.
Do not run CMD on the print-server, however. Doing so will create
an endless loop: CMD redirects data headed for the parallel port to the
Spooler directory, Spooler then sends this back out to the parallel
port--you get the idea.
OS1.3
Although, AmigaLink was developed for OS2.0+ users, it functions
fine using OS1.3 (reportedly even on an Amiga 1000). It's not as
automated as under OS2.0+, so you'll have to use some CLI commands.
However, you can modify your Startup-Sequence to automate the process.
Remember to include the StartServer command, as the installation process
does not do it for you.
My Network
My test network consisted of an Amiga 3000, 4000, and CDTV. The
CDTV required using a pass-through external floppy drive. Since many
external floppy drives, like the "official" black CDTV ones, do not have
a pass-through connector, Spectronics will be releasing an inexpensive
T-connector providing pass-through capabilities. An adapter for CD32 is
supposedly in the works too. (Note: If you don't have a keyboard for
your CDTV, there are a few public domain utility programs that emulate
keyboard input using a mouse.)
I was extremely impressed with the AmigaLink. The network is
professional and well implemented. Remote devices function just like
local ones and their icons appear right on the Workbench, including
"left out" icons (OS2.0+)! The network is virtually invisible. Here is
where my earlier suggestion for short Host names comes into play. Volume
names that display wider than their icon, will make for a real ugly
Workbench! This is not a functional problem, but could become
aesthetically annoying.
To network a CDTV, you'll need to have a non-booting CD inserted
into the unit so it will boot off the floppy drive. I was happy to find
that AmigaLink handled changing the CDs. Although the volume name didn't
change, I could still access it. To get the name to change you must
unmount and remount the device.
When I rebooted a node, I found that on remote nodes, I had to
unmount and then remount any devices imported from the rebooted node.
This was so, even though the Import program indicated the devices were
mounted. You can click the "mounted" button twice or do it from the CLI.
When there are a lot of devices, a script file to unmount devices works
great.
I also found a conflict between by Goldengate 486 board and
AmigaLink. However, as long as I didn't try to access a device on the
Amiga with the GG486 while it was emulating, all was fine.
Performance
Since Amiga floppy drives are no speed-burners, I was very
interested to see what kind of performance a floppy port network could
achieve. The manual states that the data transfer rate is 450,000 bits-
per-second, which translates to about 55 kilobytes-per-second (kbps). My
best case was a disappointing 40kbps on my network, while ParNet
achieved around 61kbps.
However, this is only half of the story. During transfers, ParNet
hogged CPU time, while AmigaLink barely required any. So although
AmigaLink is slower than ParNet, it uses substantially less system
resources, which could be a factor when multitasking. Still, AmigaLink
is just fast enough not to cause an anxiety attack.
VideoToaster Farm
Spectronics is also considering releasing software to do
simultaneous Lightwave rendering on multiple Amiga/Toaster systems. This
is an excellent application for AmigaLink because a fast transfer rate
is not a requirement. "Rendering farms"--just like the big boys (i.e.,
Amblin Imaging (seaQuest DSV) and Foundation Imaging (Babylon 5))--are
now within the reach of smaller 3D studios.
Worth The Price
This is an extremely important product for the Amiga and one that
I am very excited about. At $260 for a two-node network, AmigaLink may
seem a little expensive, but a functionally equivalent Ethernet-based
network would cost you many times that. AmigaLink performs like a full-
fledged network--albeit a little slower--and is well worth its cost.
AmigaLink, $259.95 for two computers
$124.95 for each additional
Spectronics International U.S.A., Inc.
34 East Main St. #3
Champaign, IL 61820
(217)352-0061
converted with guide2html by Kochtopf